Posts Tagged ‘epson ink’

Installing Epson Cartridges

Thursday, January 27th, 2011

Installing Epson Cartridges

Installing your new ink cartridges:

  • Remove all packaging and carefully insert the cartridge into the printer
  • Follow the instructions on screen to install the cartridge
  • Perform a head clean/nozzle clean through the printer software to clean the print heads and get the ink flowing.

Troubleshooting

My printer is producing cartridge error message?

  • If the cartridge is producing an error message and won’t allow you to print then try removing the cartridge and installing again.
  • Check the cartridge you have purchased is the correct one for your printer.
  • Sometimes you will need to reset your printer. Leave the printer switched on and pull the power cable out the back (do not turn the printer off at the mains). Leave the printer switched off for a few minutes and then plug the power cable in and turn on the printer.

Print quality is poor or printer is producing black sheets

  • If the print quality is poor then it means your print heads inside the printer need cleaning. To do this you need to go into your printer settings on the computer and perform what’s known as either a print head clean or nozzle clean.  This can be done several times to clean the print heads if required.

How much ink does my cartridge contain?

Thursday, January 6th, 2011

How much ink does my cartridge contain?

If you look at the facts and figures, it seems printer ink is one of the most expensive liquids in the world. Why is ink so expensive? Read on to find out…

Ink cartridges aren’t the most exciting thing in the world; in fact they are very boring and most people dread purchasing them. Everyone complains about the cost of replacing their ink cartridges and not many people realise just how little ink they are getting for their money.

A typical colour ink cartridge contains 3 separate colours. Until recently HP colour cartridges used to contain on average 18ml of ink, 6ml Cyan. 6ml Yellow and 6ml Magenta and these were far from cheap! Recently printer manufacturers have reduced the amount of ink in their cartridges. Some HP cartridges now contain as little as 5ml of ink in total, less than 2ml of each individual colour! This means if you use a lot of one particular colour, you could find it running out very quickly. Even though some HP cartridges now contain less than 1/3 of the previous cartridges capacity, the price has stayed the same, this gives HP an immediate 300% increase.

HP is not the only company guilty of this trick; Lexmark and Epson have followed the same pattern over the years. It appears that Canon are the only company who have kept consistent amounts of ink in their cartridges over recent years.

The most expensive cartridge you will purchase is the starter cartridge that comes with your new printer! Some of the starter cartridges contain as little as 3ml of ink overall! The good news is there are more economical cost effective options out there, such as remanufactured or compatible ink cartridges.

Lexmark and HP used to give different model numbers for their higher yield cartridges, and in some cartridges HP continue to do so. Many models are now using ‘XL’ after the cartridge number to signify it is the high user option. This makes a significant difference to the amount of ink in the cartridge. For example, a standard HP 350 cartridge contains a mere 4.5ml and for a little extra cash the HP 350 XL contains a whopping 25ml, this is an increase of 500%! So make sure you keep an eye out for any XL versions.

Storing your Ink Cartridges

Tuesday, July 13th, 2010

Storing your Ink Cartridges

Ink cartridges should always be stored in their original packaging in an upright position with the printhead facing up. If you have several cartridges in the same package, ink might start leaking and mixing if cartridges are stored on their side. Ensure the storage space is not too warm, excessive heat can cause air bubbles inside the cartridge to expand causing ink to leak out.

How do I store partially used ink cartridges?

There are times when it is necessary to remove an ink cartridge from your printer and store it for re-use. It is frustrating to reinstall an expensive ink cartridge that you know still has plenty of ink remaining, only to find that the printhead where the ink comes from has dried up! You are left with a dry cartridge with ink still left inside that you can’t use. You can easily prevent this frustration by storing your partially used cartridges correctly, read on …

  • Place the used ink cartridge into a zip sealed sandwich bag, if you have more than one cartridge to store; use a separate bag for each cartridge.
  • Wet a sponge or small towel and wring out the excess water so the sponge or towel is left damp but not dripping.
  • Add the sponge or towel to the plastic bag holding the printer ink cartridge.
  • Seal the bag with the sponge or towel and the ink cartridge inside.
  • Store the sealed bag in a dark, cool place until you are ready to reinstall the printer ink cartridge and continue using it.

Don’t remove the ink cartridge if it’s empty and you don’t have a spare cartridge to replace it with. If you remove the cartridge then air will cause the ink to dry within hours which will clog the nozzles. This is especially important if you have an Epson printer where the printhead is attached to the printer and not the cartridge.

Ink Cartridge Recycling Methods

Thursday, July 1st, 2010

Ink Cartridge Recycling Methods

You may be wondering what to do with your empty ink cartridges?

There are two main methods of recycling ink cartridges and they are direct recycling and remanufacturing/refilling the cartridge.

Direct recycling is where the cartridge is broken down and reconstructed into a brand new cartridge as efficiently as possible.

You will need to do your research though to make sure you don’t end up doing more damage than good when you send off a cartridge for recycling.

Direct Recycling

The major printer manufacturers have all been undertaking environmentally friendly schemes and activities for years now. HP began their first recycling scheme back in 1991 and has since recycled over 265 million ink cartridges. Canon began their toner recycling scheme in 1990 which was a world first. Lexmark also has a well documented cartridge return programme doing both recycling and refilling, Brother also runs very similar operations … the list is endless!

The main intention of printer manufacturers appears to be limiting the amount of cartridges that end up in landfill. But direct recycling consumes a massive amount of energy and some people think it could be doing more damage in the long run.

Canon says that they reuse 75% of every toner cartridge returned to them, and of the remaining 25% all of it is recycled to other products such as roof tiles! HP aims to be able to reuse all of the plastic in its cartridges, but how much energy does this use? If you have ever seen a HP 78 or HP 17 cartridge, you will notice they are very sturdy and contain a lot of plastic, the energy needed to break down this cartridge must be huge. These cartridges can fit into over 50 different models of HP printers, that is over 50 consumer demands for 1 cartridge. Would it not be better to refill these cartridges, as the cleaning and refilling process is energy efficient, rather then break up the entire cartridge and rebuild it from scratch?

Companies like HP claim that this process affects quality to such an extent that they won’t consider it. Whilst they do have a point, I’m sure not all HP users will be aiming for Van Gogh clarity; they just want something cheap that does the job. It is here that remanufactured cartridges come into their all. When you take a look at an Epson compatible TO711 black ink cartridge, you realise how simple a cartridge is, it is essentially just a tank full of ink.

Epson Ink Cartridges

Epson have all the important technology such as the print heads, permanently fitted inside the printer, therefore the cartridges have no value. Essentially they are just a plastic housing for the ink you are using to print. Due to this, there really is nothing to recycle. Epson have said they incinerate all the returned ink cartridges in the most environmentally friendly process. It is much better to take your empty Epson cartridges to your local plastic recycling centre!

What is the future for cartridge recycling?

The majority of major printer manufacturers have seen their shortcomings and are trying to improve the situation in their new printer models. Although HP still design uneconomical printers, as soon as one colour runs out in the colour cartridge then the printer will refuse the print. Their solution is that as soon as one colour runs out all the remaining inks will blend together to produce the empty ink colour until the cartridge runs out. But you would think this would use more ink and drain the cartridge faster!? But it is advertised as a ‘green scheme’.

Carbon Footprint

You need to be careful of some major printer manufacturer recycling schemes, as some of them will transport the cartridge literally around the world. See an example below:

1. Cartridges for recycling arrive in the South Coast of America

2. Plastic is then shipped to North America

3. Refined cartridges are sent to China for packaging

4. The cartridges are then returned to America for sale

The best way to recycle your empty ink cartridges is through UK cartridge recycling envelopes, who donate a small amount of money to charity for each cartridge received. This way the cartridge is sent direct to an ink cartridge remanufacturing company, fully tested and cleaned out and then refilled with ink and sent straight on to another customer, whilst helping a charitable cause in the process. So think twice before you send off your empty cartridges for recycling … you may be doing more harm then good!!

  • Categories